Owner’s Manual Copyright © 2003 ROLAND CORPORATIONAll rights reserved. No part of this publication may be reproduced in any form without the written
10Contents of the package Rackmount adaptors (two pcs.) Use this when you want to install the UA-1000 in an audio rack. Two rack ears are included.
11 Panel Descriptions Front panel fig.front 1. Combo input jacks 1–4 These are analog audio input jacks with high-quality preamps. Either XLR type or
12Panel Descriptions5. Input peak indicators These indicate whether distortion is occurring in the sound being input to each input jack. The peak ind
13Panel Descriptions10. Sampling frequency select switch This selects the sampling frequency at which audio data will be recorded and played back.In
14Panel Descriptions14. Output volume select switch This switches the jacks that will be controlled by the output volume knob. Hold this down for two
15Panel Descriptions Rear panel fig.rear 20. AC inlet Connect the included AC cable here. Plug in the cable firmly so that it does not fall out. For
16Panel Descriptions27. Insertion / Input jacks 1–4 These can be used either as insertion jacks or as input jacks.Turn the Insertion/Input Select swi
17Application of AC230 V Power Cordfor UKexcept for UKUA-1000_e.book 17 ページ 2003年8月6日 水曜日 午前11時52分
18 Preparations for using the UA-1000 Installing the driver What is a driver? A “driver” is software that transfers data between the UA-1000 and ap
19Preparations for using the UA-1000 7 Prepare the CD-ROM. Insert the CD-ROM into the CD-ROM drive of your computer. 8 Click the Windows start butt
2 CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIRCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT R
20Preparations for using the UA-1000 fig.2-7_30 14 The screen will indicate “Please choose your search and installation options.” Select “Don’t sea
21Preparations for using the UA-1000 18 The screen will indicate “Completing the Found New Hardware Wizard.” Click [Finish]. Wait until “Found New
22Preparations for using the UA-1000 Giving priority to background services If you fail to make this setting, you may experience interruptions in the
23Preparations for using the UA-1000 Driver settings About the input/output devices In order to obtain the best performance from the software you are
24Preparations for using the UA-1000 Input/output device settings If you are using the UA-1000 with the Media Player included with Windows, use the f
25Preparations for using the UA-1000 Check whether there is sound Now we will play back the sample data to check whether connections and settings are
26 Basic connections and settings This chapter explains basic connections for the UA-1000 and describes the data flow. * To prevent malfunction and/o
27Basic connections and settings Recording a mic or guitar With the setup shown below, you can listen to the audio data played back by your computer
28Basic connections and settings ● Input sensitivity knob Use the input sensitivity knob to adjust the input level. To obtain the best audio quality,
29Basic connections and settings Recording onto an external ADAT device fig.adat-out ● Connections Connect an optical cable from the OPTICAL OUT jack
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual...
30Basic connections and settings Capturing sound from an external ADAT device fig.basic ● Connections Connect an optical cable to the OPTICAL IN jack
31Basic connections and settings Monitoring 5.1 channel sound fig.51ch ● Connections Connect phone jack audio cables to the output jacks. ● Output vo
32Basic connections and settings Inserting an external effects processor If you want to use an external effects processor to process the sound of a m
33Basic connections and settings Recording a digital input signal fig.digital ● Connections Connect your digital audio device to either the coaxial d
34Basic connections and settings Synchronizing to the word clock input Using the UA-1000 as the master In the setup shown here, the UA-1000 is the ma
35Basic connections and settings Using an external device as the master In the setup shown here, the hard disk recorder or other external device is t
36 Various settings You can make various settings for the UA-1000 from your computer.Use UA-1000 Control Panel to make settings. This lets you contro
37Various settings Screen items and what they do Main window fig.control You can use UA-1000 Control Panel to control each block of the UA-1000. fig.
38Various settings WAVE IN PATCH BAY Here you can select the input source audio signals that will be sent to the computer. Choose from the five stere
39Various settings Reading and writing memories Five sets of UA-1000 settings can be stored within the UA-1000 itself. These stored memories can be r
4 012a: • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service C
40Various settings Adjusting the audio latency You can change the driver settings to adjust the latency of the audio. To adjust the latency, change t
41 Synchronization settings About the ADAT mode switch and external clock switch ADAT mode switch ADAT Output mode fig.adat-on When you press the A
42Synchronization settings ADAT Input mode Simultaneously press the ADAT mode switch and the External Clock mode switch. The peak indicator will ligh
43Synchronization settings Internal blocks in ADAT input mode fig.int-blockB External clock switch Turn this switch on if you want the UA-1000 to s
44 System settings Restoring the factory settings (Factory Reset) fig.system 1. While simultaneously holding down the output volume select switch a
45 Troubleshooting If an unexpected problem occurs while using the UA-1000, read this chapter first. It contains numerous tips for resolving problems
46Troubleshooting Problems related to the UA-1000 Can’t output/input sound ● Is the UA-1000’s external clock switch set correctly? If the UA-1000’s e
47TroubleshootingSound from devices connected to the input jack is not heard in the headphones ● Is the headphone volume set appropriately? Turn the
48TroubleshootingSound is interrupted during audio playback ● If Cubase SX displays a message of “Sample could not be set,” open “Project Setup” and
49TroubleshootingCan’t record/play MIDI ● Is the MIDI device you are using set correctly? In order to record/play MIDI tracks via the UA-1000, the UA
5 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 4, please rea
50 Main specifications UA-1000: USB 2.0 Audio Capture Number of Audio Record/Playback Channels Record: 10 channelsPlayback: 10 channelsFull duplex Si
51 Block diagram Factory settingsINPUT MONITOR(DIRECT MONITOR)SOFT CTRLOFF(BYPASS)WAVE OUT MONITORUA-1000_e.book 51 ページ 2003年8月6日 水曜日 午前11時52分
52Block diagram Output volume select switch: MAIN Output volume select switch: ALLINPUT MONITOR(DIRECT MONITOR)SOFT CTRLON / OFF(BYPASS)WAVE OUT
53 INDEX Numerics 192 kHz ... 385.1 channel ...
54INDEX R Rackmount adaptors ... 10Rear panel ...
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.For EU CountriesFor CanadaThis Class B digital a
As of December 10, 2005 (EDIROL-1)Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL
6 Handling CD-ROMs 801 • Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD-ROM discs may not be rea
7 Contents USING THE UNIT SAFELY...3IMPORTANT NOTES ...
8 Main features 480 Mbps transfer speed with hi-speed USB (USB 2.0), supporting 10 IN/10 OUT at superb 24-bit/96 kHz audio quality Ten independent ch
9 Contents of the package UA-1000 fig.ua1000 Power cord This is the only power cord you should use with the UA-1000. Do not use any power cord ot
Comments to this Manuals